Main technical-productive characteristics of machine

The combined sammying and setting machine model RAL/PS has been designed to satisfy the peculiar sammying requirements of certain kinds of hide. The machine is equipped with two sammying rollers. The model RAL/PSR fits a sammying roller with a felt sleeve and the second sammying roller is chromium-plated and heated.
- The position of the leather supporting cylinder allows a quick and easy feeding of hides, as quick and "mild" is the movement of machine open/close.
-Adjustment of distance between blade cylinder and rubber cylinder is achieved by a simple push-button device, the value of which can be read on a decimal display.
The blade cylinder is equipped with a hydraulic device which allows its gradual approach to the hide during closing stage, its quick removal and gradual approach during reversal stage. Such device can be used according to everyone's requirement, it allows to avoid possible marks on the leather which could be caused by the blades cylinder during above mentioned working stages.
-The stretching cylinder is independent and turns in the opposite direction to leather feeding, with adjustable speed.
-The two sammying rollers have independent sammying pressures. The sammying pressure can be adjusted by a hydraulic device placed on the machine side (sammying pressure goes from 3 to 22 tons per each cylinder).
-Leather feeding can be adjusted by a hydraulic device, up to 34 mt/min.
The control device is located on the machine side and can be read on its relevant decimal display.
-Automatic felts centering device.
-Automatic lubrication of machine with EP/O grease.
-The electric equipment is fully contained by a waterproof box, the control board is located on a suitable position, on the right side of the operator.

In order to improve the quality of our products, we reserve the right to change, without notice, the characteristics of the machine. Power and production data are indicative and have to be adapted to working conditions.