Main technical-productive characteristics of machine

- The machine is equipped with a double safety device with metal safety bar and photoelectric cells in order to be completely safe.
- The position of leather supporting cylinder permits a quick and easy feeding of skins, as well as a rapid and "mild" machine open/closing.
- The adjustment between the blade cylinder and the supporting cylinder is made by a handwheel placed on the right side of the machine, with relevant dial.
- The blade cylinder and the felt cylinder are equipped with a hydraulic device allowing their gradual approach to leather after machine closing, their speed removal and gradual reapproaching during reversal stage. This device allows to avoid marks on the leather which could be caused by the two cylinders during the above mentioned stages.
- Stretching cylinder is assembled on two connecting rods and its adjustment is made by two graduated screws on both sides of machine, in order to keep in parallel. - The drying pressure is a adjustable from 0 to 10 Tons by a simple device placed on the left side of machine.
- Leather feeding is made by rubber cylinder and felt cylinder. Such cylinders are controlled by two independent hydraulic motors.
This produces a same rim speed allowing to save power, rubber and felt sleeve. Leather feeding speed goes from 18 to 44 m/min. and can be adjusted by a hydraulic device placed on the left side of machine. Automatic device for open and reversal.
- Electric equipment is completely contained by a stainless steel waterproof box placed on the right side of machine. Control panel is placed on the upper side of machine.
- If requested the machine can be equipped with automatic lubrication device.

In order to improve quality of our products, we reserve the right to change, without notice, the characteristics of the machine. Power and production data are approximate and have to be adapted to working conditions.